Posted on

Start a timer with RFID Tag Reader

Learn how to start a timer with an RFID tag reader. (scroll down for the video) You can buy a starter kit for about $30 that contains an RFID reader and some cards and tags. That’s all you need to track time with RFID. Check amazon.

Already got RFID readers installed?

Now that everything is in place, you can start and stop a timer in Standard Time® using with just a simple RFID scan. Wave a proximity card in front of the RFID scanner and a timer starts. Wave it again, and the timer stops. Now you’ve got some serious time tracking data to work with.

Every RFID scan in Standard Time includes the following information. Of course the end user doesn’t realize or care that all this is automatically collected. They just wave their card and go on. But you can use this intel to improve manufacturing, assembly lines, or just for employee time and attendance.

What is collected in every RFID tag scan:

  1. Employee name, and the workgroup they are in
  2. Timestamps for start and stop times, including the actual hours between those timestamps
  3. Project the employee is working on
  4. Task the employee is working on
  5. Client the project is assigned to
  6. Billing rates assigned to the employee
  7. Client cost for the full duration between scans
  8. Salary cost for the full duration

Seriously? All that is collected in one scan? Yup. Pretty powerful.

What you can report on with RFID scans:

  1. Total employee hours for a given date range, like last week or last month
  2. Total project hours for all the projects in your organization
  3. Total client hours
  4. Salary and client billable amounts
  5. Client invoices

Watch the video and try it out.

Posted on

Start Timer with Mag Card Readers

Manufacturers: Use a mag card reader to start and stop a timer. Consider swiping cards to start and stop a timer for manufacturing purposes. Swipe once to start the timer, and swipe again to stop. The video below describes how.

This technique allows you to associate any employee badge or card to a Standard Time® username. Swipe once to start a timer for the associated user. A selected project and task will start. The timer will run until you swipe again.

Manufacturing and assembly shops can collect information like total product build times, total employee hours, packaging time, and shipping. Find out how much time you spend on each kind of work, and improve each one by a small percentage.

Download Standard Time here, and give this a try with your own magnetic card reader.

Posted on

Track Time with Multiple Barcode Scanners on a Single PC

Manufacturing shops can now set up multiple barcode scanners on a single computer to track assembly time, boxing, and shipping. Watch the video below to learn how.

Here’s the deal… you don’t want to dedicate a single computer to every barcode scanner. In other words, one computer for one scanner. You have too many shop floor operators to do that. It’s a waste of resources, and every PC needs care and maintenance. You want to connect as many barcode scanners as you can to each PC on the shop floor. As long as workers can see the screen, you’re good to go.

Turns out, barcode prefixes are the answer. Assign a unique prefix to each barcode scanner on the manufacturing floor. Then you can connect as many as you like. Standard Time® will recognize the prefix and start timers for each scanner.

Not only can you connect multiple scanners, you can set default values that take effect every time you scan. Want to associate a dedicated gun to one single employee only? Easy, just set the default username. Now the employee no longer needs to scan their username to start the timer.

Other default values let you associate a gun to a certain project or task. Every time you scan with that gun, your project and task is already chosen for you. No need to scan them. The timer will start immediately, without the need to tell it which project you’re on.

All these little improvements to barcode scanning make your manufacturing process just a little more efficient. Give it a try!

Posted on

Manufacturing Runs on Standard Time

On the odd chance your manufacturing shop is not running Standard Time® we’re suggesting this video. It’s a cute little animated job that really only serves to inspire your thoughts along those lines. (scroll down for it) But hey, you’re already running ST anyway, right?

No? Then take a look.

There’s a module in ST that lets you scan manufacturing barcodes to measure time. Find out how much time each product takes, each product line takes, and how long employees are actually spending on manufacturing the actual parts.

Follow these steps to scan a part in your shop:

  1. Begin by scanning the employee name
  2. Scan the project name
  3. Scan the part or serial number
  4. The timer starts
  5. Perform your step in the manufacturing process while the timer runs
  6. Minutes or hours go by…
  7. Scan your employee name again
  8. Scan the word STOP
  9. The timer stops, and you now have one time log with the exact time this employee spent on this single part.

Collect a few hundred of these time logs and you have a valuable asset you can use in meetings, with clients, on invoices, or in post project analysis.

How huge is that?

Posted on

Barcode Scanning in Manufacturing

No texting on the shop floor, or you’re all fired!

No barcode scanning unit labels either! That would tell management exactly how long each unit took to manufacture, and how long each project took, and how much time employees are working.

No! We can’t have that!

Do you want to drag us out of the dark iron age, and into the modern world? Because that’s exactly what barcode scanning on the shop floor would do. We’d no longer enjoy the dark, unlit manufacturing environment where workers sling hot steel and toil long hours until after nightfall, and come in Christmas morning to catch up on stuff they didn’t finish Christmas Eve. Instead, efficiency would climb, and workers would have more time for simpler tasks and family and lunches. Nope, that would just not do.

Manufacturing barcoding is just too dangerous for this shop floor!